How to use the calculator
- Pick the project type. This fills in a normal thickness and labor rate.
- Enter the length and width in feet and the thickness in inches.
- Choose your finish, reinforcement and whether you need a new gravel base.
- Set your area. Prices in big coastal cities run about 25% above the US average.
The estimate updates as you type. Use Print estimate to keep a copy for when you talk to contractors.
How the cost is worked out
Cubic yards = length × width × (thickness ÷ 12) ÷ 27 × (1 + waste)
Concrete = cubic yards × price per yard + short-load fee
Total = (concrete + base, steel and finish + labor) × area factor
Worked example: 20 × 20 patio, 4 inches thick
400 sq ft at 4 inches is 4.94 cubic yards, or 5.43 yd³ with 10% waste. At $165 a yard the concrete costs $896, plus a $114 short-load fee. A gravel base and wire mesh add $520 and labor at $4 per sq ft adds $1,600. The total is about $3,130, or $7.83 per square foot.
Concrete prices in 2026
| Item | Typical price |
|---|---|
| Ready-mix concrete, delivered | $125 – $200 per cubic yard |
| Plain slab, installed | $6 – $12 per sq ft |
| Do it yourself with ready-mix | $2 – $4 per sq ft |
| Stamped concrete, installed | $12 – $28 per sq ft |
| 80 lb bag of concrete mix | about $6 – $8 |
What raises or lowers the price
- Thickness. Going from 4 to 6 inches uses 50% more concrete.
- Where you live. Labor in high-cost cities can be double the rural rate.
- Finish. Stamped and colored concrete cost far more than a broom finish.
- Site work. Tearing out old concrete, grading and gravel all add cost.
- Access. If the truck can't reach the pour, you may need a pump.
- Job size. Small jobs cost more per square foot because of minimum charges.
Questions people ask
How much does concrete cost per square foot?
A plain 4-inch slab usually costs $6 to $12 per square foot installed in 2026. If you pour it yourself with ready-mix, the material is about $2 to $4 per square foot.
How much is a yard of concrete?
Ready-mix usually costs $125 to $200 per cubic yard delivered. Many areas are close to $160 to $180. Orders under 10 yards often add a short-load fee.
How much does a 20x20 slab cost?
A 20x20 slab is 400 square feet and needs about 5 cubic yards at 4 inches thick. Installed, it usually costs $2,400 to $4,800.
How many square feet does a yard of concrete cover?
About 81 sq ft at 4 inches thick, 65 sq ft at 5 inches and 54 sq ft at 6 inches.
Is ready-mix or bagged concrete cheaper?
For jobs under about 1 cubic yard, bags are cheaper and easier. For anything bigger, ready-mix costs less per yard and saves hours of mixing.
All concrete calculators
- Slab Cost CalculatorAny slab size, per sq ft
- Price per Yard CalculatorReady-mix with PSI and add-ons
- Pad Cost CalculatorShed, hot tub and AC pads
- Driveway Cost CalculatorNew and replacement driveways
- Patio Cost CalculatorPlain, colored and stamped
- Foundation Cost CalculatorSlab-on-grade with thick edges
- Removal Cost CalculatorBreak up and haul away
- Floor Cost CalculatorGarage, basement, polished
- Delivery Cost CalculatorTruck, pump and short-load fees
- Footing Cost CalculatorCost per linear foot
- Block Wall Cost CalculatorBlocks, grout and labor
Estimates use 2026 US averages and are for planning only. Real prices depend on your contractor, site and local market.